Popular
-
2026 | TOP 8 Industrial 4G Router Manufacturers for Smart City Infrastructure
-
iHF Low Noise High Precision Miniature Ball Linear Guide for Semiconductor Equipment
-
iHF Low Noise High Precision Miniature Ball Linear Guide for Semiconductor Equipment
-
Why Aurora's Camping Headlamps Outperform Traditional Options
-
MYLION Battery Backup Solutions for FTTH Customer Premises
GF-AB02 Thermal Gel
ZS-GF-AB30 is a kind of appearance paste two-component molding high thermal conductivity silicone gel, can be heated curing, with the characteristics of the higher the temperature the faster the curing. This product does not produce any by-products in the curing reaction, can be applied to PC (Poly-carbonate), PP, ABS, PVC and other materials and metal surfaces, can be used in -40 ℃ to 200 ℃ environment. It can be used in the environment from -40℃ to 200℃. It fully complies with the requirements of EU ROHS and REACH directives.
Product characteristics：
ZS-GF-AB30 is a kind of appearance paste two-component molding high thermal
conductivity silicone gel, can be heated curing, with the characteristics of the
higher the temperature the faster the curing. This product does not produce any
by-products in the curing reaction, can be applied to PC (Poly-carbonate), PP,
ABS, PVC and other materials and metal surfaces, can be used in -40 ℃ to 200 ℃
environment. It can be used in the environment from -40℃ to 200℃. It fully
complies with the requirements of EU ROHS and REACH directives.
Typical applications：
·New Energy Vehicle
·Communication Equipment
·LED
·Computer, Cell Phone
·Drone
·For other applications, please consult our technical staff.
Product Parameters:
|
Test items |
Component A |
Component B |
Test Standard |
|
|
Before curing |
Appearance |
Light red paste |
White paste |
Q/GZJTHG 42-2022 |
|
Viscosity(cps) |
250,000-450,000 |
250,000-450,000 |
Q/GZJTHG 42-2022 |
|
|
Mixing ratio A:B (weight ratio) |
1∶1 |
Q/GZJTHG 42-2022 |
||
|
Operating time at 25°C (min) |
30-90 |
Q/GZJTHG 42-2022 |
||
|
Curing time at 25°C (h) |
2-6 |
Q/GZJTHG 42-2022 |
||
|
After curing |
Hardness(Shore 00) |
35-55 |
ASTM D2240 |
|
|
Thermal Conductivity(W/m*K) |
≥3.0 |
ASTM D5470 |
||
|
Dielectric strength（kV/mm） |
≥6 |
GB/T 1695 |
||
|
Volume resistivity （Ω·cm） |
≥1.0×10 12 |
GB/T 1692 |
||
|
Density（g/cm3） |
2.6 ±0.1 |
GB/T 13354 |
||
|
Flame Rating |
UL94V-0 |
UL94 |
||
The above performance data before curing are measured at 25℃, and the
mechanical and electrical performance data are measured after the specimens are
fully cured.The company will not be responsible for the data difference caused
by different test conditions or product improvement.
Related products
-
Quick View
01072-081-HS25 Series Incremental Encoder-BEI sensors
Contact UsHS25 combines the rugged, heavy-duty features usually associated with shafted encoders into a hollow-shaft style. Its design includes dual bearings and seals for up to IP65 environmental ratings…
-
Quick View
Carbon Fiber Sheet
Contact UsCarbon fiber board is a high-performance composite panel primarily reinforced with carbon fibers and cured using a resin matrix (such as epoxy resin).
-
Quick View
Earth/Ground Resistance Online Detector/Tester ( MiniType,Wired system)
Contact UsSunlightweld Earth Resistance Online Detector adopts on-line monitoring technology such as non-contact measurement,not affect the grounding effect and the normal operation of facilities.
-
Quick View
Librids Modular Portable Power Station for Home Use Outdoor Generator Off-grid Power Supply
Contact UsThis 4kwh portable power station is ideal for home backup, small businesses, and outdoor professionals.
Reviews
There are no reviews yet.