BWS HIGH-GLOSS STEAM MOLD TEMPERATURE CONTROL UNIT
Without connecting boilers and other external thermostat auxiliary equipment,omitted the complex boiler equipment (high-pressure equipment safety and Environmental approval) and Pipeline Project.
BWS HIGH-GLOSS STEAM MOLD TEMPERATURE CONTROL UNIT
Without connecting boilers and other external thermostat auxiliary equipment,omitted the complex boiler equipment (high-pressure equipment safety and Environmental approval) and Pipeline Project.
Eliminate soluble wiring, melted marks, corrugated, silver marks on the product surface.
Completely solve surface shrinkage of plastic products.
Improve the surface gloss, the surface roughness is similar to mirror.
Products do not need to spray paint processing, improve the rate of finished products of 20-30%.
Solve the fiber products floating fiber problem, make the product quality perfect.
The thin-wall molding can improve the liquidity of injection, improve product quality and intensity
Thick-wall injection molding cycle can be reduced by 60%, increase the liquidity and fill effects of the plastic
Condensation,heat release,quicken the speed of heat exchanger,enhance the heating rate
Without connecting boilers and other external thermostat auxiliary equipment,omitted the complex boiler equipment (high-pressure equipment safety and Environmental approval) and Pipeline Project.
Completely solve the problem of the boiler steam non-recyclable.
Small volume can match different machines, 180 ℃ hot water can replace the boiler, which is not Environmental friendly.
| ITEM | UNIT | MODEL | ||
| BWS-600 | BWS-800 | BWS-1600 | ||
| Power supply | V/Hz | AC 3N-380/400V-50Hz(3phase+Earth) | ||
| Total power | kw | 65 | 106 | 157 |
| Total current | A | 100 | 160 | 236 |
| Control mode | PLC&HMI | |||
| Maximum water consumption | kg | 70 | 125 | 184 |
| Saturated steam temperature | ℃ | 182 | ||
| Water filling pump power | kw | 0.75 | ||
| Cooling pump power | kw | 1.5 | 2.2 | 4 |
| Cold/ hot water circulation outlet and inlet dimention | Inch | 1 or 3/8 (6outlet6inlet) | 1-1/4 or 3/8 (10outlet10inlet) | 1-1/2 or 3/8 (14outlet14inlet) |
| Cooling water inlet dimension | Inch | 1-1/4 | 1-1/2 | 2 |
| Compressed air inlet diameter | Inch | 1/2 | 1/2 | 1/2 |
| Size(L×W×H) | mm | 1450*700*1350 | 1750*900*1350 | 1950*950*1550 |
Related products
-
Quick View
Радарный уровнемер
Contact UsПринцип времени прохождения импульса (ToF), бесконтактное непрерывное измерение, максимальная температура 450°C (842°F), максимальное давление 160 бар (2320 psi).
-
Quick View
HCY-W1 Stand-Only Centrifugal Oil Mist Collector
Contact UsFiltering efficiency：PM2.5，99%; PM0.5，95%
Power environment：220/380V/3P 50HZ(Can be customized)
Work noise：≤65dBA
Filter life：8 － 12 months
Way in： Horizontal
Way out：Top and side -
Quick View
VS5-JLF/JLZ Погружные насосы, устойчивые к коррозии и абразивному износу
Contact UsОборудование подходит для работы с кислотными и щелочными средами, высокотемпературными, коррозионными и абразивными, требующими высокой скорости потока.
Химическая промышленность по производству серы и фосфора – это соединения или химические продукты, полученные в результате химических реакций с использованием элементов серы и фосфора.
Эти соединения содержат элементы серу и фосфор, которые являются токсичными, и взрыв на серно-фосфорном химическом заводе приведет к выбросу токсичных газов, таких как диоксид серы -
Quick View
Deburring Brushing Edge Rounding Machine
Contact UsSurface Brushing Rolling Brush Combination Deburring Machine
Reviews
There are no reviews yet.