3816F

Typical process

Dry	Drum wind oven： 75～90℃，2～4h； Dehumidified dryer： 75～90℃，2～4h； Vacuum drying oven： 75～90℃，2～4h；
Processing temperrature	Feed section：220～230℃ Compressing section：235～255℃ Metering secion：230～250℃
Mold temperature optimum	240℃
Processing Moisture Centent	＜0.1%

Test Item	Test Standard	Test Condition	Unite	Value
Others
Product Identification	ISO1043	——	——	PA6
Filler Content	ISO3451-1	——	%	0
Density	ISO1183	23℃	g/cm³	1.13±0.02
Melt Flow Rate	ISO 1133	275℃，2.16kg	g/10min	8
Relative Viscosity	ISO307	96%H2SO4,1g/dl	ml/g	4.05±0.05
Viscosity number	ISO307	96%H2SO4,0.5g/dl	ml/g	245±10
Extractables	ISO6427	——	%	≤0.5
Impurities、Different color particles	——	Visual inspection	Grain/g	≤1
Mechanical
Flexural Strength	ISO178	23℃，2mm/min	MPa	110
Flexural Modulus	ISO178	23℃，2mm/min	MPa	2200
Tensile Strength	ISO527	Type I spline,50mm/min	MPa	70
Tensile Module	ISO527	Type I spline,1mm/min	MPa	2500
Tensile Strain at Break	ISO527	Type I spline,50mm/min	%	110
Charpy Notched Impact Strength	ISO179/1eA	23℃	kJ/m2	6/C
Charpy Unnotched Impact Strength	ISO179/1eU	23℃	kJ/m2	60/N
Rockwell Hardness	ISO2039-2	R Scale	—	65
Thermal
Melting Temperature	ISO11357	——	℃	220±5
Heat Distortion Temperature	ISO75-2	0.45MPa	℃	105
Heat Distortion Temperature	ISO75-2	1.8MPa	℃	/
Electrical
Volume Resistivity	IEC60093	——	Ω•cm	1015
Surface resistivity	IEC60093	——	Ω	1013

All is typical data, only for reference, not the permit of quality assurance.

Reviews

There are no reviews yet.

Be the first to review “3816F”