Electric sightseeing car battery pack

Reliable Long-Life Power for Electric Sightseeing Vehicles

Our LFP battery pack for electric sightseeing cars is designed to provide safe, reliable, and long-lasting power for tourist fleets, resort transportation, scenic-area shuttle vehicles, and other outdoor passenger transport applications.

Using Lithium Iron Phosphate (LiFePO4) battery cells, the battery combines long cycle life, stable performance, low-temperature adaptability, and intelligent battery management. With a cycle life of up to 6000 cycles under 80% DOD at 25°C and 0.5C, it is designed for frequent charging and discharging in daily fleet operations.

The battery is available in different voltage and capacity configurations, including 76.8V 200Ah / 15.36kWh and 96V 300Ah / 28.8kWh, with customization available according to vehicle requirements.

Key Features and Benefits

1. Safe and Reliable LiFePO4 Battery Chemistry

The battery uses LiFePO4 (Lithium Iron Phosphate) cells, providing a stable battery chemistry suitable for passenger-carrying electric sightseeing vehicles.

For scenic-area transportation, battery safety is especially important because vehicles operate with passengers and often work continuously throughout the day. The LFP chemistry provides a stable foundation for reliable fleet operation.

The integrated battery system is designed for use in electric sightseeing vehicles where dependable power and long service life are important.

2. 6000+ Cycle Life

The battery provides a cycle life of 6000 cycles at 80% DOD, 25°C, and 0.5C.

For sightseeing fleets with frequent daily operation, long cycle life can help reduce battery replacement frequency and support more predictable long-term operating costs.

Compared with batteries designed primarily for occasional use, a long-cycle-life battery is particularly valuable for tourist vehicles that repeatedly charge, operate, and recharge throughout the operating season.

3. Low-Temperature Adaptability with Heating Function

Outdoor sightseeing vehicles may operate in cold-weather and high-altitude scenic areas. To address low-temperature conditions, the battery is equipped with a low-temperature heating function.

The specified discharge temperature range is -20°C to +60°C, while charging is supported from 0°C to +55°C.

The heating function helps improve battery usability in cold environments by supporting appropriate charging and operating conditions.

This makes the battery suitable for sightseeing transportation in locations where seasonal temperature changes or cold-weather operation are important considerations.

4. High Energy Capacity in a Practical Package

The battery is designed to provide substantial energy storage while maintaining a practical form factor for electric sightseeing vehicles.

Two standard configurations are available:

• 76.8V 200Ah – 15.36kWh

• 96V 300Ah – 28.8kWh

The higher-capacity 96V 300Ah version provides greater stored energy for applications requiring increased energy capacity.

Actual vehicle range depends on factors including vehicle weight, passenger load, driving conditions, terrain, speed, temperature, and operating habits.

5. Intelligent BMS with RS485 and CAN

An intelligent Battery Management System (BMS) is integrated into the battery pack to monitor and manage battery operation.

The battery supports RS485 and CAN communication, allowing it to communicate with compatible vehicle control and monitoring systems.

These communication interfaces can support functions such as battery status monitoring, system integration, and fleet-level management, depending on the vehicle controller and communication protocol.

6. IP54 Protection

With an IP54 protection rating, the battery is designed to resist dust ingress and water splashes under specified conditions.

This makes it suitable for outdoor sightseeing vehicles operating in scenic areas, resorts, parks, and tourist destinations.

The battery should still be installed and operated according to the manufacturer's environmental and installation requirements.

Electric Sightseeing Car Battery Specifications

Battery configurations can be customized according to user and vehicle requirements.

Designed for Tourist Fleet Operations

Electric sightseeing vehicles often operate on fixed routes with frequent stops, starts, passenger loading, and daily charging. A suitable battery therefore needs to balance energy capacity, cycle life, safety, and environmental adaptability.

Our LFP battery packs can be used for:

• Electric sightseeing cars

• Tourist shuttle vehicles

• Resort transportation vehicles

• Scenic-area shuttle fleets

• Park transportation

• Outdoor passenger vehicles

• Other low-speed electric vehicles

The available 76.8V and 96V configurations allow vehicle manufacturers and fleet operators to select a battery system according to the vehicle's electrical architecture and energy requirements.

Suitable for Scenic Areas and Outdoor Transportation

From mountain tourist destinations to large parks and resorts, sightseeing vehicles may encounter changing terrain and weather conditions.

The battery's combination of LiFePO4 chemistry, long cycle life, low-temperature discharge capability, heating function, IP54 protection, and intelligent BMS makes it suitable for demanding outdoor fleet applications.

The battery can support consistent daily operation while providing communication interfaces for integration with compatible vehicle systems.

Custom Battery Solutions

Different sightseeing vehicles have different requirements for voltage, capacity, dimensions, current output, communication, and installation space.

Our battery system supports customization according to specific user requirements. Depending on the project, customers can discuss:

• Battery voltage

• Battery capacity

• Pack dimensions

• Installation structure

• Charge and discharge current

• BMS configuration

• RS485/CAN communication

• Heating function

• Vehicle compatibility

• Packaging and delivery requirements

This makes the battery suitable not only for standard sightseeing vehicles but also for OEM vehicle manufacturers, fleet operators, and customized electric vehicle projects.

A Long-Life Battery Solution for Sightseeing Fleets

For tourist transportation operators, battery performance directly affects vehicle availability and daily operating efficiency.

Our LiFePO4 battery pack for electric sightseeing cars combines 15.36kWh and 28.8kWh energy options, 6000-cycle life, low-temperature adaptability, IP54 protection, and intelligent RS485/CAN communication in a battery platform designed for outdoor electric transportation.

Whether you operate a scenic-area shuttle fleet, develop electric sightseeing vehicles, or need a customized battery pack for a specific vehicle platform, our team can provide a battery configuration based on your voltage, capacity, dimensions, operating environment, and vehicle requirements.

Extend the operating range and reliability of your sightseeing fleet with a customized LFP battery solution. Contact us today to discuss your battery requirements.